Dayson Soft K180 Foam-Backed Sanding Roll 115 mm × 25 m

Dayson Soft K180 Foam-Backed Sanding Roll 115 mm × 25 m

Dayson Soft K180 Foam-Backed Sanding Roll is a flexible abrasive material used for intermediate sanding, surface levelling and preparation before painting or coating. Measuring 115 mm in width and 25 metres in length, the product is supplied as a continuous roll in a cardboard dispenser box.

The flexible foam backing helps distribute sanding pressure more evenly across the workpiece surface. This construction allows the abrasive to conform to flat, curved and irregularly shaped surfaces during sanding.

K180 Grit and Surface Preparation

K180 grit is suitable for intermediate sanding and surface refinement after coarser abrasive stages. Typical applications include dry sanding of polyester fillers, primed surfaces and wood materials.

The abrasive can be used to reduce sanding marks and prepare workpieces for subsequent finishing operations. Where a finer surface finish is required, additional sanding with higher grit numbers may be necessary.

Flexible Foam-Backed Construction

The foam backing allows the abrasive to adapt to different workpiece geometries while helping distribute contact pressure during sanding. This supports more consistent surface contact and helps reduce pronounced sanding marks.

Its flexibility is particularly useful when working on curved surfaces, edge transitions and components with varying surface contours.

Roll Format and Applications

The sanding material is supplied in a 115 mm wide, 25 m long roll. The cardboard dispenser box allows organised storage and convenient removal of the required length for each application.

Dayson Soft K180 can be used for sanding filler and primer surfaces, preparing wood components and performing dry intermediate sanding before painting or coating.

The sanding method and abrasive grade should be selected according to the workpiece material and required surface finish. Excessive pressure should be avoided, and appropriate ventilation, dust control and personal protective equipment should be used during sanding.